Disc membranes (modified PES)

Disc membranes (modified PES)
Brand: Novasep Novasep
Product Code: xPxxxDxxx
Availability: Inquiry Basket
Qty:  
   - OR -   
TangenX manufactures ProStream™ and HyStream™ modified PES membranes validated for use in cGMP processes.  Both membrane chemistries are available in our NovaSet™ and Sius™ ultrafiltration cassettes.  We also die cut from sheet stock these membranes into standard disc formats, and custom configurations upon request.  Our cut discs are available in common diameters to fit conventional stirred cells and our X-Flo76 Membrane Screening System.   Discs are disposable; however, if appropriate cleaning measures are taken, they may be washed and reused typically 10 to 20 times.

Call 054-6490991 with your special die configuration needs.
Discs.JPG
PROSTREAM LOW-BINDING DISC MEMBRANES

HyStream™ (XP) - This PES membrane has been modified to be significantly more hydrophilic than standard PES membranes.  It is resistant to fouling by hydrophobic species such as fats, lipids, anti-foams, and other similar highly fouling substances.  HyStream™ modified PES membranes prevent the dramatic decrease in flow rate that typically occurs with many downstream processing applications where hydrophobic species are present.  Optimal flow rates are achieved for fast, efficient processing.  Available in 1kD, 3kD, 5kD, 10kD, 30kD, 50kD, 100kD, 300kD, 0.1um and 0.2um.

HyStream - the performance of regenerated cellulose with the robustness of modifed PES!

Pore Size Distribution and Selectivity 

The selective portion of an ultrafiltration membrane is the shiny surface layer known as the "skin" of the membrane.  The layer beneath the skin is made up of a "finger-pore" structure that supports the skin and facilitates liquid flow.  Examination of the scanning electron micrograph (SEM) below shows the porous substructure of the TangenX ProStream™ 10K membrane.  The uniform finger pores of this substructure allow for minimal particle entrapment which results in low fouling and maximum fluid flow.  TangenX has developed this membrane substructure to ensure a defect-free surface and provide maximum adhesion to the substrate while achieving highest possible flow rates.

 

SEM1500x.jpg
SCANNING ELECTRON MICROGRAPH OF PROSTREAM 10K mPES MEMBRANE

 

 

UF membranes are size rated in kilodaltons (kD) and are based on nominal molecular weight cutoff (MWCO).  MWCO is the ability of a membrane to retain 90% of a globular macromolecule of defined molecular weight.  Unlike microporous membranes, UF membranes do not have an absolute micron rating (e.g., retain 100% of a macromolecule of the rated pore size) because all pores are not the same size.  Instead, UF membranes utilize nominal molecular weight cutoffs that are a measure of the pore size distribution across the membrane surface.  This differing pore size distribution enables UF membranes to have high selectivity; that is, the ability to differentiate between macromolecules of similar size.

 

Membrane Selection Guidelines: Factors to Consider for Optimal Performance

TangenX recommends selecting a molecular weight cutoff (MWCO) that is 3 to 6 times smaller than the protein or other molecule you want to retain.  If obtaining highest possible flow rates is most critical to your application, then choose a more open MWCO membrane at the lower end of the range (3x).  If retention is your main concern, then choose a tighter MWCO membrane at the upper end of the range (6x).  Please keep in mind that certain factors can influence the selectivity and retentivity of a membrane.  The shape of a molecule, presence of other solutes, pressure, adsorption and ionic conditions may affect membrane performance.

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Tags:

A2S technologies Ltd. © 2020